IRFB4410ZPBF  

Infineon IRFB4410ZPbF is a 100V single N-channel StrongIRFET™ power MOSFET in a TO-220 package.The StrongIRFET™ power MOSFET family is optimized for low RDS (on-state) and high current capability. These devices are ideal for low frequency applications where performance and ruggedness are required. The comprehensive portfolio is suitable for a wide range of applications including DC motors, battery management systems, inverters, and DC-DC converters.

Main applications:  interrupters, uninterruptible power supplies, solar inverters, DC motor drives, battery-powered applications

SG2823J-883B 

The Microchip SG2823J-883B is an array of high voltage medium current drivers. The SG2823J-883B integrates eight NPN Darlington pairs and internal suppression diodes to drive lamps, relays, and solenoids in many military, aerospace, and industrial applications that require harsh environments. Features open collector output, breakdown voltage greater than 50V, and 500mA current carrying capability.

Main applications:  Used to drive lamps, relays and solenoids in many military, aerospace and industrial applications where harsh environments are required

STM32F103RCT6 

The STMicroelectronics STM32F103RCT6 is based on the mainstream enhanced Arm® 32-bit Cortex®-M3 microcontroller and features 256 KB Flash, 72 MHz CPU, motor control, USB and CAN.

Main applications: wireless connectivity, medical, consumer markets

PMBT3906,215 

PMBT3906,215 is a PNP switching transistor in a SOT23 (TO-236AB) small surface mount device (SMD) plastic package. Collector-emitter voltage VCEO = -40 V and collector current capability IC = -200 mA.

Main applications: general purpose amplification and switching

SPC5602DF1MLL4  

The SPC5602DF1MLL4 is a 32-bit MCU, power architecture core, 256KB Flash memory, 48MHz, -40 to 125°C, automotive grade, QFP-64 package.The SPC5602DF1MLL4 is the MPC5602D family of 32-bit automotive microcontrollers is a series of System on Chip (SoC) devices designed to provide the foundation for the next wave of central The SPC5602DF1MLL4 is a family of 32-bit automotive microcontrollers designed to provide the foundation for the next wave of central body controller, smart junction box, front module, peripheral body, door control and seat control applications.

Main applications:  Automotive

TL3842P 

The Texas Instruments TL3842P is an economical single-ended 500KHz current-mode PWM controller with 16V/10V UVLO and 100% duty cycle over the 0°C to 70°C temperature range.

Main applications:  switching regulators of any polarity, transformer-coupled DC/DC converters

UC3842BN  

ST's UC3842BN is a current mode PWM. The UC3842BN is a UC284xB family control IC that provides the necessary features to implement an offline or DC-DC fixed frequency current mode control scheme with a minimum number of external components. The internally implemented circuitry includes a trimmed oscillator for precise duty cycle control under voltage-locked conditions with a start-up current of less than 0.5mA, a trimmed precision reference for error amplifier input accuracy, logic to ensure latching operation, a PWM comparator that also provides current limit control, and a totem pole designed to supply or absorb high peak currents. output stage designed to supply or absorb high peak currents. The output stage is suitable for driving N-channel MOSFETs, which are low in the off state.

Main applications:  Suitable for a variety of applications

ZLDO1117QG18TA  

The ZLDO1117QG18TA is a fixed-mode regulator with 1A output current capability.The ZLDO1117QG18TA has a 2% tolerance over the entire industrial temperature range. It is ideal for providing well regulated power supplies for high voltage IC applications such as high speed bus termination and low current 3.3V logic supplies over the entire industrial temperature range.

Primary Applications: Industrial Applications

AD590MF/883B  

The AD590MF/883B is a two-pin IC temperature sensor with an output current proportional to absolute temperature. The device acts as a high-impedance, constant-current regulator with a regulation factor of 1 µA/K over a supply voltage range of 4 V to 30 V. The on-chip thin-film resistor is laser-tuned for use in calibrating devices so that the device outputs 298.2 µA of current at 298.2 K (25°C).

Main applications: Remote detection applications

LD1117S50C-TR 

ST's LD1117S50CTR is a low dropout regulator capable of delivering output currents of up to 800 mA. the SOT-223 surface mount package optimizes the thermal characteristics and even provides the associated space saving effect. the NPN regulator ensures high efficiency. In fact, in this case, unlike PNP, the quiescent current flows mainly to the load. Only a very common 10 μF minimum capacitor is needed to achieve stability. On-chip trimming allows the regulator to achieve very tight output voltage tolerances to within ± 1 % at 25 °C.

Main applications: industrial, home and professional appliances, factory automation, metering

What other chips do you usually use

but are not on the list?please tell me!